+44(0)1494 328 600 
sales@ammedicalalloys.com
Cobalt-Chromium-Molybdenum (CCM) alloy meets the strictest biocompatability and corrosion resistance requirements for the medical industry. It is produced by powder metallurgy which gives it an exceptionally fine microstructure. Its high cobalt content may impair its machinability and cold forming is difficult but it does exhibit high levels of toughness, hardness, fatigue resistance and wear resistance.
Applications
Medical implants
Endoprosthesis devices
Osteoprosthesis devices
Watch making
Typical Chemical Composition
| C | Si | Mn | Cr | Mo | Ni | N | Co | |
| Min | 26.00 | 5.00 | ||||||
| Max | 0.14 | 1.00 | 1.00 | 30.00 | 7.00 | 1.00 | 0.25 | Balance |
Typical Mechanical Properties
| Spec | Tensile (Rm) Mpa (min) |
Yield (R0.2%) MPA (min) |
Elongation A4d (%- min) |
Hardness HRC |
| ISO 5832-12 | 1192 | 827 | 12 | 40 min |
Specifications
UNS R31537
DIN CoCr28Mo
AFNOR CoCr28Mo
ASTM F1537 Alloy 1
ISO 5832-12
Availability
Cobalt CCM Alloy is available in round bar from 2.00mm diameter up to 63.5mm diameter.
Disclaimer : Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.
